Plasto Crafts Industries (P) Ltd. Superspin r-v/fa ,Rota 6R - V/Fm , Superspin r-v/fm , Rota 4R - V/Fm , bath circulators with precise temperature control

Bath Circulators offered by Plasto Crafts have been carefully designed to meet the exacting requirements of temperature control in a variety of applications such as absorbance measurements in Spectrophotometry, Viscosity measurements and some Biomedical test procedures etc.

The circulators incorporate a pressure pump which makes it possible to circulate bath fluid held at constant temperature through an external jacketed system and hold the system at any temperature between - 40°C to + 150°C depending upon the model chosen.

All the models are bench-mounting type, simple to operate and with a precise temperature control.
The following features are shared by all the models shown in this brochure.
• Temperature control accuracy of ± 0.1 °C microprocessor PID controller.
• Digital indication of the preset and actual temperature.
• Bath chamber and its cover are made of Stainless Steel.
• Drain-tap to drain out the bath liquid.
• Over temperature protection.
• Castors for floor mounting on request at extra cost.

SPECIFICATIONS
LOW TEMPERATURE BATH CIRCULATOR MODEL LTB-10
• Operating Temperature Range • Temperature Readout • Temp. Control Accuracy • Pump Flow Rate • Bath Opening/Depth • Bath Volume • Temp. Control Mode • Cooling Capacity at 20C • Overall Dimensions (L x W x H)		: - 10°C to + 95°C : Digital : ± 0.1°C : 12 Lit / Min : (220 x 215 x185) mm : 12 Lit. : Microprocessor PID : 200W : (400 x 375 x 675) mm.

LOW TEMPERATURE BATH CIRCULATOR MODEL LTB - 20
• Operating Temperature Range :- 20°C to + 95°C
• Overall Dimensions: (400 x 375 x 695) mm. (L x W x H)

LOW TEMPERATURE BATH CIRCULATOR MODEL LTB -40
• Operating Temp. range :- 40°C to + 50°C
• Overall Dimensions: 450 x 440 x 815 mm

4 Litre capacity models are also available.

SOME APPLICATIONS

• Spectrophotometry
• Viscometry
• Thermogravimetry
• Some Bio-Medical Test Procedures
• Aging Test to accelerate aging
• Oil or Grease behaviour at low Temperatures
• Material Testing at Sub-zero temperatures.

SPECIFICATIONS
HEATING BATH CIRCULATOR MODEL CTB-100 Microprocessor PID Control
• Operating Temperature Range • Temperature Readout • Temp. Control Accuracy • Pump Flow Rate • Bath Opening/Depth • Bath Volume • Temp. Control Mode • Heater Power • Overall Dimensions (L x W x H)		: Ambient + 5°C to 95°C : Digital : ± 0.1°C : 12 Lit / Min : (220 x 215 x185) mm : 12 Lit. : Microprocessor PID : 1000W : (400 x 375 x 465) mm.

HEATING BATH MODEL CTB - 150

• Operating Temperature Range Ambient :+ 5°C to + 150°C
• Temperature Control Accuracy : ± 0.1C upto 100C
± 0.5C + 100C to 150C

Heating Baths CTB - 150 do not incorporate pressure pump and
hence circulation facility is not available.

All the above models are available in 4 litre capacity also.

SOME APPLICATIONS

• Spectrophotometry
• Viscometry
• Thermogravimetry
• Some Bio-Medical Test Procedures
• Petroleum Industry

BATH CIRCULATORS

LIST OF CLIENTS